How to configure network load balancers¶
Note
Network load balancers are currently available for the OVN network.
Network load balancers are similar to forwards in that they allow specific ports on an external IP address to be forwarded to specific ports on internal IP addresses in the network that the load balancer belongs to.
The difference between load balancers and forwards is that load balancers can be used to share ingress traffic between multiple internal backend addresses. This feature can be useful if you have limited external IP addresses or want to share a single external address and ports over multiple instances.
A load balancer is made up of:
A single external listen IP address.
One or more named backends consisting of an internal IP and optional port ranges.
One or more listen port ranges that are configured to forward to one or more named backends.
Create a network load balancer¶
Use the following command to create a network load balancer:
lxc network load-balancer create <network_name> [<listen_address>] [--allocate=ipv{4,6}] [configuration_options...]
Example with a specified listen address:
lxc network load-balancer create my-ovn-network 192.0.2.178
Example with an allocated listen address:
lxc network load-balancer create my-ovn-network --allocate=ipv4
Each load balancer is assigned to a network.
Listen addresses are subject to restrictions. If a listen address is not specified, the --allocate flag must be provided. See Requirements for listen addresses for more information about which addresses can be load-balanced, as well as how to use the --allocate flag.
Load balancer properties¶
Network load balancers have the following properties:
| Key: | backends |
| Type: | backend list |
| Required: | no |
See Configure backends.
| Key: | config |
| Type: | string set |
| Required: | no |
The only supported keys are user.* custom keys.
| Key: | ports |
| Type: | port list |
| Required: | no |
See Configure ports.
Requirements for listen addresses¶
The following requirements must be met for valid listen addresses:
Allowed listen addresses must be defined in the uplink network’s
ipv{n}.routessettings or the project’srestricted.networks.subnetssetting.If you specify a listen address when creating a load balancer, it must be within the range of allowed addresses.
If you do not specify a listen address, you must use either
--allocate ipv4or--allocate ipv6. This will allocate a listen address from the range of allowed addresses.
The listen address must not overlap with a subnet that is in use with another network or entity in that network.
Configure backends¶
You can add backend specifications to the network load balancer to define target addresses (and optionally ports). The backend target address must be within the same subnet as the network associated with the load balancer.
Use the following command to add a backend specification:
lxc network load-balancer backend add <network_name> <listen_address> <backend_name> <target_address> [<target_ports>]
Example:
lxc network load-balancer backend add my-ovn-network 192.0.2.178 test-backend 10.41.211.5
If no target ports are specified when adding the backend:
The load balancer uses the listen ports defined in the port specification associated with that backend, if any.
If no such listen ports are defined, the backend has no target ports and is inactive. You must either add a port specification or edit the load balancer configuration to include a
target_portvalue in the backend specification or alisten_portvalue in the ports specification.
If you want to forward the traffic to different ports, you have two options:
Specify a single target port to forward traffic from all listen ports to this target port.
Specify a set of target ports with the same number of ports as the listen ports to forward traffic from the first listen port to the first target port, the second listen port to the second target port, and so on.
Backend properties¶
Network load balancer backends have the following properties:
| Key: | target_port |
| Type: | string |
| Default: | same as |
| Required: | no |
For example: 70,80-90 or 90
Configure ports¶
You can add port specifications to the network load balancer to forward traffic from specific ports on the listen address to specific ports on one or more target backends.
Use the following command to add a port specification:
lxc network load-balancer port add <network_name> <listen_address> <protocol> <listen_ports> <backend_name>[,<backend_name>...]
Example:
lxc network load-balancer port add my-ovn-network 192.0.2.178 tcp 80 test-backend
You can specify a single listen port or a set of ports. The backend(s) specified must have target port(s) settings compatible with the port’s listen port(s) setting.
Port properties¶
Network load balancer ports have the following properties:
| Key: | protocol |
| Type: | string |
| Required: | yes |
Possible values are tcp and udp.
Edit a network load balancer¶
Use the following command to edit a network load balancer:
lxc network load-balancer edit <network_name> <listen_address>
This command opens the network load balancer in YAML format for editing. You can edit the general configuration, as well as the backend and port specifications.
Example load balancer configuration YAML file:
listen_address: 192.0.2.178
location: ""
description: ""
config: {}
backends:
- name: test-backend
description: ""
target_port: ""
target_address: 10.41.211.5
ports:
- description: ""
protocol: tcp
listen_port: 70,80-90
target_backend:
- test-backend
Delete a network load balancer¶
Use the following command to delete a network load balancer:
lxc network load-balancer delete <network_name> <listen_address>